Male and female connector on both end, convenient to install for both novice and professionals.
--Input voltage: 5V-24V/DC
--Working current : 12A / 3 channels
--Overall dimension: 42(L)×12(W)×3(H) mm
--Female and male connector on both end for strip and power connecting
RF Remote
RF wireless remote signal can pass through barrier,far control distance (15 meters in open area).You don’t have to point the remote tothe receptor as you do with IR remote. The RF remote works as your car key.
Caution: RF remote is driven by 3V CR2025 button battery. Please try to replace with the same type battery.
Function buttons on RF remote
-ON/STANDBY: to turn on or switch to standby mode
-30 total modes--20 static colors, 19 dynamic modes
-SPEED+ /SPEED- : adjust lighting speed dynamic mode
-BRIGHT+ / BRIGHT- : adjust lighting brightness in different modes
-DEMO : at demo mode, strip will cycle 9 dynamic modes and each mode for 3 times
-MODE+ / MODE- : switch to dynamic mode from static lighting mode, or switch between dynamic modes
-COLOR+ / COLOR- : static color adjustment.Switch to static color from dynamic mode, or between static colors
-SINGLE COLOR SELECT:white/red/green/blue/yellowing/pink
UPC | 741459502072 |
---|---|
SKU | Y009C2Z3D6 |
Button_Controller | Remote Control |
Input Voltage | DC 12-24V |
Remote | Radio Frequency |
Feature Accessory | Mini size |
Color | White |
-Convenient LED controller kit--mini RGB controller + RF wireless remote
-Ultra slim design RF remote, Memory function
-Input voltage 5-24V , 3 output channels with 12A working current Controller
-1 controller matches with 1 RF remote, both enable you to control RGB strip
-19 dynamic mode, 20 static colors, 5 brightness grade and 10 speed grade
The reason you got green when pressed RED button is the wires sequence of the strip light is different from the controller. For example, some strip light is in a sequence of V+ RBG, however, our controller is in sequence of V+RGB.
To solve the problem, you may need to switch the red wire and green wire of the strip light before you connect it to the controller.
Please login to your account to post a question