GU10 bulb base features in 10 mm (pin center-to-center distance) 2-pin bayonet mount and operating under mains voltage rather than lower voltage.
This porcelain lamp holder is specifically designed to work with GU10 bulbs of different light source. Our product is rated up to 250V at 2A, which will satisfy your various lighting demands.
With the 150mm long silicon covered cable and the pre-cut ends, these lamp holders are rather easy to fit into you existing hard wired system.
The two holes in the middle have metal contacts integrated, which are used to connect with the GU10 bulbs, the other two holes are for affixing screws.
Bulb fitting and replacing are fairly easy: insert the bulb and gently twist it clockwise to lock the bulb in position. To remove the bulb, you twist it counter clockwise.
Specification
Base dimension: ø28 mm x 15 mm
Wire length: 145mm
Base type: GU10
Max voltage: 250V
Max current: 2A
Application
For LED, CFL and halogen bulb with GU10 base
Safety Notice
To avoid electric shock and burn, turn off the power and let the bulb cool before wiring and changing the lamps.
Package Include
5 pack GU10 sockets
UPC | 616320519254 |
---|---|
SKU | Y00J9CQEEG |
Unit Count | 5 pcs |
Base Type | GU10 |
Type of Accessory | Socket |
Color | White |
-Compatible with GU10 base LED, CFL and halogen bulbs
-Heat resistant porcelain insulating and mica covered base, silicone covered wire
-Pre-stripped wire ends and snap-to-fit installation for easy fitting
-Two slotted holes for bulb contact pins, and the other two holes for affixing screws
-ø28 mm x 15 mm base and 145 mm wire, rated up to 250V and 2A
There are no product questions yet.
Please login to your account to post a question