Good choice if you need a fast connection! Very handy for splicing RGBW/RGBWW LED strip lighting strip together, strip-to-strip, without soldering. Open the clip of the connector, you can see connectors have grooves for the light strip and insert the strip into the connector, under the groove conductors. When you hear the snap the connector is secure and you have made your connection!
Tips:
For waterproof LED strip light, peel off a few inches silicone around the soldering line, open the clip of the connector, gently insert the strip light under the small conductors and you'll feel the connector grab the ribbon.
For non-waterproof LED strip light, just open the clip, gently insert the strip light under the small conductors and make sure that the positive side on both the connector and the LED light strip match up in order to get a proper connection, then you'll feel the connector grab the ribbon.
By the way, make sure your section of LED strip light has two contacts (positive and negative poles) and the contacts are both clean before installation. When you finish installation, please lightly tighten and fasten the LED strip light to confirm you have made a solid connection. Your connection is made!
Specification
Width: 12mm
Application
To connect two LED strip lights together
For 5050 LED strip light re-connection
Package Include
5pcs of 5-conductor LED strip connector box
UPC | 616320522117 |
---|---|
SKU | Y00XBHU2HA |
Wire Gauge | No |
Type of Accessory | Extension Wire |
Unit Count | No |
Color | white |
-Joint connection for 5050 RGBW/RGBWW strip light
-RGBW Strip to Strip Connector 5 Conductors (without wire)
-Accommodates LED strip with widths up to 12mm
-No soldering needed when cut and re-connect LED strip
-Time saving slide and snap easy connector
There are no product questions yet.
Please login to your account to post a question