5-Pack 10mm 2-conductor Quick Splitter LED Strip Connector (Strip to Strip) for Single Color 5050 LED Strip Lights

Make connection within 3 seconds!

This product is a must-have component of your strip light project since it will help you to save time and headache of soldering.
Use this connection box to join cut single color 5050 LED strip light together without soldering. Open the clip and you will find the grooves to accommodate the strip light. Insert the strip light to make sure the 2 conductors are tightly and precisely touched.

Tips:

For waterproof LED strip light, peel off a few inches silicone around the soldering line, open the clip of the connector, gently insert the strip light under the small conductors and you'll feel the connector grab the ribbon.

For non-waterproof LED strip light, just open the clip, gently insert the strip light under the small conductors and make sure that the positive and negative side on both the connector and the LED light strip match up in order to get a proper connection, then you'll feel the connector grab the ribbon.

Make sure the conductors of your strip light are clean before starting the installation. When you finish installation, please lightly tighten and fasten the LED strip light to confirm you have made a solid connection.

Specification

Width: 10mm

Application

To connect two LED strip lights together
For single color 5050 LED strip lights re-connection

Package Include

5pcs of 2-conductor LED strip connector box