5-Pack 10mm 2-conductor Female DC Power Connector Adapter - LED Connector Cable for 5050 Single Color LED Strip Lights

A fast and easy way to connect 5050 LED single color strip to DC power, without worrying about soldering. Simply open the clip of the connector, insert the strip into our 10mm connector, lock the strip by fastening the clip, and the female DC end to power adapter. That’s it!

Tips:

For waterproof LED strip light, peel off a few inches silicone around the soldering line, open the clip of the connector, gently insert the strip light under the small conductors and you'll feel the connector grab the ribbon.

For non-waterproof LED strip light, just open the clip, gently insert the strip light under the small conductors and make sure that the positive and negative side on both the connector and the LED light strip match up in order to get a proper connection, then you'll feel the connector grab the ribbon.

Make sure the conductors of your strip light are clean before starting the installation. When you finish installation, please lightly tighten and fasten the LED strip light to confirm you have made a solid connection.

Specification

Length: 5.7inch
Female DC plug diameter: 5.5mm outer*2.1mm inner
2-conductor width: 10mm
Max voltage: 300V
Material: PVC

Application

With this connector you can quickly and easily attach your single color strips to the DC power.

Package Include

5*2-pin connector to DC adapter cable