US Standard Touch Screen LED Dimmer Switch for Single Color LED Lights - TR06U

This single color LED dimmer is adopted with high precision capacitance touch control chip which significantly increases the touch sensitivity and effectively reduced errors in operation.

To achieve a more accurate and smooth adjustment,use the 11 brightness adjustment bars to reach up to 255 grades of static brightness.

Glass panel screen provides incomparable touch feelings for users and ensures smooth operation.The dimmer is also made to be very easy to clean and thus suitable for frequent usage.

You can use this dimmer to work with a variety of LED lighting fixtures. For instance,12Volts LED light bulbs, 5050 and 3528 LED flexible single color strip light, ceiling lights, panel lights etc.

Installation Guide:

1. Gently pry gaps in touch panel with a screwdriver, and then slowly remove the panel cover
2. Wiring: connect wiring according to your application.Refer to typical application diagram included in the package
3. Install switch base: mount the controller on the cassette in the wall after connecting the wire, and then nail the screw, fix it on the wall, then install the switch pedestal on the wall;
4. Close up touch panel cover

External dimension: 74(L)*120(W)*41.8(H) mm
Output power: 12V: <96W, 24V: <192W
Packing size: 145(L)*99(W)*53(H) mm
Working temperature: -20 to 60℃
Static power consumption: <1W
Power mode: common anode
Supply voltage: DC12~24V
Output voltage: DC12~24V
Gross weight: 189g
Output current: <8A
Output: 1 channel
Net weight: 127g
Task: adjust

Kindly reminder:

1. Connect the load wire at first, following by the power wire; please double check to prevent short circuit possibility before you turn on the power.
2. The supply voltage of controller ranges in DC12V~DC24V, it may burn out the controller once exceed the voltage ranges.